CJWFL - M-21 ARTILLERY FLASH SIMULATOR
- MSDS: CJWFL
- Manufacturer: NEW ENGLAND ORDNANCE
- Product Name: M-21 ARTILLERY FLASH SIMULATOR
- National Stock Number: 1370-01-128-0418
Product Identification
Product ID:M-21 ARTILLERY FLASH SIMULATOR
MSDS Date:03/18/1994
FSC:1370
NIIN:01-128-0418
Status Code:A
MSDS Number: CJWFL
Responsible Party
GUILD, NH 03754-0125
US
Emergency Phone: 1-800-225-3924
Info Phone: 603-863-7700
Preparer: RUSSELL MITCHELL
Cage: 1EJ07
Contractor
Telephone: 603-863-7700
Cage: 1EJ07
Ingredients
BARIUM NITRATE
CAS: 10022-31-8
RTECS: CQ9625000
OSHA PEL .5 MG (BA)/M3
ACGIH TLV: .5 MG (BA)/M3
POTASSIUM NITRATE
CAS: 7757-79-1
RTECS: TT3700000
ALUMINUM
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 5 MG/M3 (RESP)
ACGIH TLV: 5 MG/M3 (RESP)
CHARCOAL
CAS: 16291-96-6
RTECS: FL7243500
SULFUR
CAS: 7704-34-9
RTECS: WS4250000
Hazards
Health Hazards Acute and Chronic:THIS DEVICE IS A SEALED ARTICLE AND AS
SUCH DOES NOT PRESENT A HEALTH HAZARD, EXCEPT WHEN IGNITED (SEE
FIRE EXPLOSION HAZARD DATA).
First Aid
First Aid:PREFERRED CLEAN UP METHOD SWEEPS MATERIAL WITH A NATURAL
FIBER (NEW HAIR) OR NON-SPARKING METAL WIRE BRUSH INTO A METAL OR
CONDUCTIVE DUST PAN THEN INTO A CONDUCTIVE OR METAL CONTAINER.
Fire Fighting
Autoignition Temp:=260.C, 500.F
Extinguishing Media:THESE UNITS CONTAIN BOTH FUEL AND OXYGEN SOURCE AND
CANNOT BE EXTINGUISHED BY NORMAL MEANS.
Fire Fighting Procedures:CLEAR IMMEDIATE AREA, CONTROL AND MINIMIZE
RESULTANT FIRES. COOLING ADJACENT AREAS MAY EFFECTIVELY REDUCE FIRE
DAMAGE. EXPECT REPEATED SMALL CONCESSIVE EXPLOSIONS WHEN SHIPPING
BOXES ARE INVOLVED.
Accidental Release
Spill Release Procedures:BROKEN UNITS MAY SPILL PYROTECHNIC POWDER.
MATERIAL SHOULD BE CLEANED UP AND INCINERATED OR BURNED REMOTELY.
CLEAN UP EFFORT SHOULD IMPLEMENT ELECTROSTATIC ENERGY CONTROLS AND
AVOID USE OF WATER A S A CLEANING AGENT. PYROTECHNIC POWDERSSHOULD
NOT BE VACUUMED EXCEPT THROUGH GROUNDED CONDUCTIVE HOSES AND BY
EXPLOSION PROOF NEC CLASS II DIV. I APPROVED VACUUM SYSTEMS.
Handling
Handling and Storage Precautions:WARNING! EXPLOSIVE ARTICLE MUST BE
STORED IN ACCORDANCE WITH 29CFR1910.109 OR MORE STRINGENT MILITARY
REGULATION SUCH AS AMCR 385-100, AFR 127-100, DOD 4145.26M KEEP
AWAY FROM HEAT, SPARKS, IMPACT FR ICTION, RF, EST.
Exposure Controls
Supplemental Safety and Health
UNDER NORMAL HANDLING NO SPECIAL PROTECTION IS REQUIRED. DURING USE
EAR PROTECTION AND ADEQUATE SHIELDING SHOULD PROTECT OPERATOR FROM
EXPLOSIVE EFFECTS OF THIS ARTICLE WHILE IT FUNCTIONS.
Chemical Properties
HCC:E1
Appearance and Odor:APPROX 4" LONG (2" DIA) WHITE PLASTIC CYLINDER WITH
SMALLER WHITE END CAP
Stability
Stability Condition to Avoid:THIS ARTICLE IS NOT REACTIVE AS A SEALED
UNIT.
Disposal
Waste Disposal Methods:WASTE MATERIALS SHOULD BE BURNED REMOTELY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.